Rank: Member
Groups: Registered
Joined: 10/3/2007(UTC) Posts: 2
|
The range/oven was working perfectly until we had an electrical storm with a couple of close lightning strikes. Now, only the top burners work. The entire electronic display is blank and does not respond to pressing any button. The oven does not light or do anything. Do I need to replace the microprocessor, the control board, or something else? Of coarse I double checked that the power is on to the unit.
Thanks in advance
|
|
|
|
Rank: Member
Groups: Registered
Joined: 10/3/2007(UTC) Posts: 2
|
try turning the breaker off for a few minutes then turn back on sometimes static builds up in the microprosesor and the control does not know what to do so the unit goes dead by cuting power to the unit it allows static to clear this is pretty comon with electrical storms
|
|
|
|
Rank: Member
Groups: Registered
Joined: 10/3/2007(UTC) Posts: 2
|
Thanks for your reply. I tried disconnecting the power for a while and it still does not work. I should have mentioned it is an LP gas unit. The top burners ignite and burn properly, but the electronic display is blank and there is no way to operate the oven. Any ideas?
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close