Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.



New Topic Post Reply
Go to last post Go to first unread
#1 Posted : Friday, July 20, 2007 7:13:13 AM(UTC)

Rank: Member

Groups: Registered
Joined: 7/20/2007(UTC)
Posts: 2

How difficult is it to change a pump?
See inside of your appliance - diagrams and part photos for virtually every model.

powered by
Matt / APP Team  
#2 Posted : Friday, July 20, 2007 5:05:18 PM(UTC)
Matt / APP Team

Rank: Administration

Groups: Administrators
Joined: 7/18/2007(UTC)
Posts: 80

Here is a picture of the pump/motor area:

Here is the info on your pump: Part Details - MAYTAG Pump, part number: AP3873050

Over all not super hard, you will have to pull the front panel. Remove the belt and then pull the pump and motor out as a assembly. Remove the 3 screws holding the pump on, clean any black residue off the motor shaft, the reinstall in reverse order. Make sure you remember where everything goes! Especially the belt routing and idler arm position!
Quick Reply Show Quick Reply
Users browsing this topic
Similar Topics
Whirlpool Cabrio still leaks after changing pump and seals. (Washer Repair)
by stinkoman 11/8/2017 4:38:07 AM(UTC)
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.