GE Monogram Control Panel - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

GE Monogram Control Panel Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: ZBD6880K10SS	Brand: GE	Age: 1 - 5 years
Previous Topic Next Topic

Handymanman		#1 Posted : Thursday, November 13, 2008 9:22:59 AM(UTC)
Rank: Member Groups: Registered Joined: 11/13/2008(UTC) Posts: 2		The controls are in the top edge of the door. It appears that when the door is latched the controls are fine but when you open the door the lights flash on the go off so that the panel is now inop. It is almost like the closed side of the switch/latch is fine but the open side is not switching the panel on. Could also be the PCB or a cable? Any advise? Thanks, Steve


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

abadfish66		#2 Posted : Thursday, November 13, 2008 9:35:24 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 5/28/2008(UTC) Posts: 1,620		more than likely the keypad is bad---->Part Details - GE Keypad, part number: WD34X11074


User Profile View All Posts by User View Thanks

Handymanman		#3 Posted : Thursday, November 13, 2008 9:41:19 AM(UTC)
Rank: Member Groups: Registered Joined: 11/13/2008(UTC) Posts: 2		Help me understand. If the keypad were bad why would it be powered up when the door is closed and go dead when the door is opened? Steve


User Profile View All Posts by User View Thanks

abadfish66		#4 Posted : Thursday, November 13, 2008 9:47:21 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 5/28/2008(UTC) Posts: 1,620		It's a ribbon cable, rubs on the metal inside of the door, can get cut and cause a short. also moisture can get in there and cause it also. Have you tried disconnecting power to the dishwasher for a couple of minutes and seeing if that fixes it.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close