Whirlpool Motor + what? - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

Whirlpool Motor + what? Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: LGT7646EQ0	Brand: Whirlpool	Age: 5 - 10 years
Previous Topic Next Topic

zmd73		#1 Posted : Sunday, November 28, 2010 12:33:17 PM(UTC)
Rank: Member Groups: Registered Joined: 11/28/2010(UTC) Posts: 3		Hello, I have a Whirlpool Gas Dryer LGT7646EQ0. The motor has started to make some funny noise when it starts. Then there is some suqeeling from the dry as it drys. I looked up the part for motor but what other parts should I replace since I am in there? I figured at least the belt but what other parts? Any assistnace would be greatly appreciated. THank you, -Dwight


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

magician59		#2 Posted : Sunday, November 28, 2010 5:47:09 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 8/16/2007(UTC) Posts: 3,273		Before you commit to the purchase of the motor, check to make sure the noise you're hearing isn't the blower fan slipping on the motor shaft. If the squeaking noise is rather high pitched, it's probably the belt tensioner (idler).


User Profile View All Posts by User View Thanks

zmd73		#3 Posted : Sunday, November 28, 2010 9:30:03 PM(UTC)
Rank: Member Groups: Registered Joined: 11/28/2010(UTC) Posts: 3		Originally Posted by: magician59 Before you commit to the purchase of the motor, check to make sure the noise you're hearing isn't the blower fan slipping on the motor shaft. If the squeaking noise is rather high pitched, it's probably the belt tensioner (idler). Now it is stoping by it self. Not sure what it could be.


User Profile View All Posts by User View Thanks

magician59		#4 Posted : Monday, November 29, 2010 5:54:17 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 8/16/2007(UTC) Posts: 3,273		It may very well be the motor. Can you make electrical tests? Do you feel comfortable testing wit 120VAC?


User Profile View All Posts by User View Thanks

zmd73		#5 Posted : Monday, November 29, 2010 6:50:45 AM(UTC)
Rank: Member Groups: Registered Joined: 11/28/2010(UTC) Posts: 3		Originally Posted by: magician59 It may very well be the motor. Can you make electrical tests? Do you feel comfortable testing wit 120VAC? I beleive it is over heating now. Because will run for about 15 minutes then it shuts its self off then we can't run it again for 15 to 20 minutes. I've been down there cleaned out all the lint that was on the motor and ran it. It ceartainly comming from the Motor area and does not seem to be slipping as it spins. I had it open and ran it to see where it was coming from. If I wanted to replace the all crucial parts for that area. What would you recomend? Your assistance is greatly appreciated.


User Profile View All Posts by User View Thanks

magician59		#6 Posted : Monday, November 29, 2010 8:49:07 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 8/16/2007(UTC) Posts: 3,273		If it's stopping, I would just replace the motor. Does it heat as it runs? Part number: AP3094245


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close