Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.



Go to last post Go to first unread
#1 Posted : Sunday, November 28, 2010 7:15:59 AM(UTC)

Rank: Member

Groups: Registered
Joined: 11/28/2010(UTC)
Posts: 1

On regular cycle, the washer will go through all cycles except the final spin. Spin works on Perm. Press and Delicate.

If I rock the timer knob downwards to the right (see attached photo), the spin works, but I have to hold it in that twisted/rocked position to keep the spin running.

I replaced the timer, and have exactly the same problem with the new timer.

Wiring - the ground from the cabinet to the control panel tests ok for continuity, the ground from the cabinet to the timer mounting screws test ok for continuity, and the ground from the cabinet to the back of the timer switch tests ok for continuity. I don't see any damaged or exposed wires, and can't find a short in the grounding.

Looking for suggestions on what to check next.
juteck attached the following image(s):
photo2.jpg (66kb) downloaded 5 time(s).
photo1.jpg (62kb) downloaded 5 time(s).
photo.jpg (51kb) downloaded 5 time(s).

You cannot view/download attachments. Try to login or register.
See inside of your appliance - diagrams and part photos for virtually every model.

powered by
#2 Posted : Monday, November 29, 2010 4:11:37 PM(UTC)

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/29/2009(UTC)
Posts: 11,699

Try checking the connectors at the end of the wire harness where it connects to the timer. A connector may be loose or broken. Then trace and check all the wires with a meter.
Users browsing this topic
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.