Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.



New Topic Post Reply
Go to last post Go to first unread
#1 Posted : Wednesday, November 12, 2008 3:40:34 PM(UTC)

Rank: Member

Groups: Registered
Joined: 11/12/2008(UTC)
Posts: 1

My dryer's buzzer goes off and does not stop until you open the door. When you close the door the dryer starts again. I used a multimeter and I believe it's the push to start button that is causing the problem. I ordered part number 3395382 and got a two prong push to start part. The problem is, mine is a three prong. I called sears and they said it should be a two prong. The part number is the same for both. The only difference between the two is they have a different sub number on them. The two prong has 178 90 005 and the three is 178 90 001. Any idea where I can get a three prong or can I use the two and leave one wire off?

Thanks for your help.
See inside of your appliance - diagrams and part photos for virtually every model.

powered by
#2 Posted : Wednesday, November 12, 2008 3:58:56 PM(UTC)

Rank: Advanced Member

Groups: Senior Expert
Joined: 10/9/2008(UTC)
Posts: 784

you should only need two check the wiring diagram and see where that wire goes
Quick Reply Show Quick Reply
Users browsing this topic
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.