Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Another No Heat Issue
Options
Go to last post Go to first unread
Model: DG04 Brand: -other- Age: 1 - 5 years
Previous Topic Next Topic
S51flyer  
#1 Posted : Thursday, October 30, 2008 9:53:28 AM(UTC)
S51flyer

Rank: Member

Groups: Registered
Joined: 10/30/2008(UTC)
Posts: 3
We have a Fisher Paykel Gas Dryer. The ignitor lights but then goes out after about 20 sec. Gas does not come on. If I pound on the dryer near the ignitor, the gas will come on. However, it won't necessarily stay on - sometimes it does and sometimes it doesn't. I just replaced the Type M coils, but it's still doing the same thing.

Is this just a stuck gas valve?

Any ideas appreciated...

Bob O.
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
v2k04  
#2 Posted : Thursday, October 30, 2008 10:20:02 AM(UTC)
v2k04

Rank: Advanced Member

Groups: Senior Expert
Joined: 10/9/2008(UTC)
Posts: 784
your model posted doesn't come up is that the complete number?
Back to top
S51flyer  
#3 Posted : Thursday, October 30, 2008 11:43:52 AM(UTC)
S51flyer

Rank: Member

Groups: Registered
Joined: 10/30/2008(UTC)
Posts: 3
Well, it's actually a DG05, but I couldn't get a hit on the Model No. either. I was getting hits on DG04 or DG06. DG05 is what it says on the Model No. tag.

I'm finding that it's not a very repair friendly Brand - i.e., no online parts explosion diagrams...
Back to top
v2k04  
#4 Posted : Thursday, October 30, 2008 1:54:59 PM(UTC)
v2k04

Rank: Advanced Member

Groups: Senior Expert
Joined: 10/9/2008(UTC)
Posts: 784
Hope this helps some
v2k04 attached the following image(s):
fp_dryer.jpg
Back to top
v2k04  
#5 Posted : Thursday, October 30, 2008 2:01:47 PM(UTC)
v2k04

Rank: Advanced Member

Groups: Senior Expert
Joined: 10/9/2008(UTC)
Posts: 784
Here's some more
v2k04 attached the following image(s):
fp_dryer1.jpg
Back to top
v2k04  
#6 Posted : Thursday, October 30, 2008 2:05:20 PM(UTC)
v2k04

Rank: Advanced Member

Groups: Senior Expert
Joined: 10/9/2008(UTC)
Posts: 784
Last One This is for 06 but I'm sure it will be the same
v2k04 attached the following image(s):
fp_dryer2.jpg
Back to top
S51flyer  
#7 Posted : Thursday, October 30, 2008 3:29:43 PM(UTC)
S51flyer

Rank: Member

Groups: Registered
Joined: 10/30/2008(UTC)
Posts: 3
Thanks for the pictures. Will do some trouble-shooting this weekend using these. It's more than I had before. Thanks!!

Bob O.
Back to top
magician59  
#8 Posted : Friday, October 31, 2008 8:42:26 AM(UTC)
magician59

Rank: Advanced Member

Groups: Senior Expert
Joined: 8/16/2007(UTC)
Posts: 3,273
Originally Posted by: S51flyer Go to Quoted Post


I'm finding that it's not a very repair friendly Brand - i.e., no online parts explosion diagrams...


Do you think you should use the term, "explosion diagrams" around a gas dryer?
Back to top
Users browsing this topic
Guest (3)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET