Need help assembling Whirlpool oven door handle - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Need help assembling Whirlpool oven door handle Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: RS6750XVN0	Brand: Whirlpool	Age: More than 10 years
Previous Topic Next Topic

SauravSengupta		#1 Posted : Saturday, October 30, 2010 7:29:55 AM(UTC)
Rank: Member Groups: Registered Joined: 10/30/2010(UTC) Posts: 2		I ordered the door handle and nut / washer parts: Part Details - WHIRLPOOL Handle, Oven Door (Black), part number: AP3028282 Part Details - WHIRLPOOL Harness, wire, part number: AP3076636 However, I can't figure out how they go together. The 'bolt' on the door handle has no threads. It looks like the 'nut' is supposed to cut the threads as it goes on, but it's not sharp enough. Do I use some other tool to cut threads on the 'bolt' piece, and then put the 'nut' on? SauravSengupta attached the following image(s):


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

SauravSengupta		#2 Posted : Saturday, October 30, 2010 11:06:22 AM(UTC)
Rank: Member Groups: Registered Joined: 10/30/2010(UTC) Posts: 2		Well, it turned out to be a compression fitting. I'd tried hammering it in but that hadn't worked. Turned out I just needed to hammer harder :) I figured I'd post a response in case someone else ran into the same issue.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close