Rank: Member
Groups: Registered
Joined: 10/26/2008(UTC) Posts: 2
|
Hello, I have a Kenmore elite dishwasher, approx 4-5 yrs old. We were running it and it stopped at the near end of drain cycle. When we turn on all led lights seem to work, can change from one cycle to another but nothing comes on the display screen has to steady dashes on it but nothing else. Is there a reset for the control panel or some sort of diagnostic mode we can put the dishwasher into to see what might be problem?
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
Remove the bottom panel and look for a pouch with the tech sheets. Post the results.
Gene.
|
|
|
|
Rank: Member
Groups: Registered
Joined: 10/26/2008(UTC) Posts: 2
|
Hello, thanks for the response took bottom panel off and no paperwork found anywhere, I don't know if this dishwasher was fixed or attempted to be fixed before.
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
According to the tech sheets I found for a similar model, the first failure suspect is the door switch. - The part number for the door switch is AP3039128 Gene.
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close