Refrigerator woes - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

Refrigerator woes Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: GS6NBEXRL01	Brand: Whirlpool	Age: 1 - 5 years
Previous Topic Next Topic

nss		#1 Posted : Friday, October 17, 2008 2:22:38 PM(UTC)
Rank: Member Groups: Registered Joined: 9/18/2008(UTC) Posts: 9		My side by side has me beside myself. It was icing up so i put in a new bimetal and it improved. Still not cold enough so i put in a new micro computer and when i turned on the unit the compressor ran for a few seconds and all stopped. I get a 2E 3C error on the controls in the ref. cabnet. what happened and what do i do next. when i put the old board back in it did the same thing. NSS thanks/


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

icehouse		#2 Posted : Friday, October 17, 2008 2:59:29 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 9/1/2008(UTC) Posts: 440		Originally Posted by: nss My side by side has me beside myself. It was icing up so i put in a new bimetal and it improved. Still not cold enough so i put in a new micro computer and when i turned on the unit the compressor ran for a few seconds and all stopped. I get a 2E 3C error on the controls in the ref. cabnet. what happened and what do i do next. when i put the old board back in it did the same thing. NSS thanks/ http://www.servicematters.com/docs/wiring/wiring_main.htm


User Profile View All Posts by User View Thanks

nss		#3 Posted : Friday, October 17, 2008 6:32:20 PM(UTC)
Rank: Member Groups: Registered Joined: 9/18/2008(UTC) Posts: 9		There's no answer in your reply. It's blank. Please send me the answer again. THanks, nss


User Profile View All Posts by User View Thanks

libertyappl		#4 Posted : Friday, October 17, 2008 7:00:26 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 8/13/2008(UTC) Posts: 3,097		Just click on the link and paste your model number in the space and you will get the other page. Nat


User Profile View All Posts by User View Thanks

icehouse		#5 Posted : Saturday, October 18, 2008 5:05:00 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 9/1/2008(UTC) Posts: 440		Thank You Nat. :)


User Profile View All Posts by User View Thanks

libertyappl		#6 Posted : Saturday, October 18, 2008 6:15:05 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 8/13/2008(UTC) Posts: 3,097		;) Just helping what I can. Nat


User Profile View All Posts by User View Thanks

v2k04		#7 Posted : Saturday, October 18, 2008 6:24:57 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 10/9/2008(UTC) Posts: 784		Which microcomputer did you replace? The one in the machine compartment? or the adaptive defrost control in the control panel?


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close