Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
ktlspop  
#1 Posted : Friday, September 21, 2007 12:19:54 PM(UTC)
ktlspop

Rank: Member

Groups: Registered
Joined: 9/21/2007(UTC)
Posts: 2

Our dryer will dry a load of clothers, it just takes two runs. We're assuming it's not getting as hot as it should. Any ideas on what to check? I opened the back and removed the coil. Instead of the bayonet I've seen on Kenmores, this is a series of coils. Can the temp control be malfunctioning? Thanks.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
richappy  
#2 Posted : Sunday, September 23, 2007 8:05:21 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
Pull the vent off the back of dryer and measure the temperature, should be around 145 degrees.If not you probably have a burnt wire somewhere.
ktlspop  
#3 Posted : Sunday, September 23, 2007 4:41:41 PM(UTC)
ktlspop

Rank: Member

Groups: Registered
Joined: 9/21/2007(UTC)
Posts: 2

I'll borrow a thermocouple from work tomorrow and check it out> I'm assuming it should be this temp with the dryer empty? Thanks.
Users browsing this topic
Guest (3)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.