Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

7 Pages«<4567>
Options
Go to last post Go to first unread
Bohnenblust  
#51 Posted : Tuesday, November 4, 2008 6:20:43 AM(UTC)
Bohnenblust

Rank: Member

Groups: Registered
Joined: 10/8/2008(UTC)
Posts: 32

-8 when should it shut off?
v2k04  
#52 Posted : Tuesday, November 4, 2008 6:30:36 AM(UTC)
v2k04

Rank: Advanced Member

Groups: Senior Expert
Joined: 10/9/2008(UTC)
Posts: 784

Let it go plugged in for 4-5 days and see what happens
Bohnenblust  
#53 Posted : Tuesday, November 4, 2008 6:31:39 AM(UTC)
Bohnenblust

Rank: Member

Groups: Registered
Joined: 10/8/2008(UTC)
Posts: 32

-10, will it hurt the compressor to run so low?
v2k04  
#54 Posted : Tuesday, November 4, 2008 6:37:31 AM(UTC)
v2k04

Rank: Advanced Member

Groups: Senior Expert
Joined: 10/9/2008(UTC)
Posts: 784

I've seen them pull to 14 and 20 below but it should cycle off soon
Bohnenblust  
#55 Posted : Tuesday, November 4, 2008 6:43:04 AM(UTC)
Bohnenblust

Rank: Member

Groups: Registered
Joined: 10/8/2008(UTC)
Posts: 32

What are the settings on the thermostat for if the 1 setting or warmest is lower than 12 below now?
Bohnenblust  
#56 Posted : Tuesday, November 4, 2008 8:04:05 AM(UTC)
Bohnenblust

Rank: Member

Groups: Registered
Joined: 10/8/2008(UTC)
Posts: 32

down to -18 should I just not care and let it go for a few days?
v2k04  
#57 Posted : Tuesday, November 4, 2008 8:07:15 AM(UTC)
v2k04

Rank: Advanced Member

Groups: Senior Expert
Joined: 10/9/2008(UTC)
Posts: 784

I would it can't hurt nothing plus you got to figure there is no load in it, That compressor is pretty tough look at all it's been through lol You could have a bad thermastat
Bohnenblust  
#58 Posted : Tuesday, November 4, 2008 8:53:32 AM(UTC)
Bohnenblust

Rank: Member

Groups: Registered
Joined: 10/8/2008(UTC)
Posts: 32

-20.6 degrees, it must be working now. that thermostat must be hard to find and to change out, it looks complicated.
v2k04  
#59 Posted : Tuesday, November 4, 2008 9:09:41 AM(UTC)
v2k04

Rank: Advanced Member

Groups: Senior Expert
Joined: 10/9/2008(UTC)
Posts: 784

It should just have 2 wires on it and a sensing bulb nothing to high tech as old as it is BTW if you can figure out a sealed system repair I know you can handle a thermastat ;-)
Bohnenblust  
#60 Posted : Tuesday, November 4, 2008 9:19:51 AM(UTC)
Bohnenblust

Rank: Member

Groups: Registered
Joined: 10/8/2008(UTC)
Posts: 32

so the selector nob is on the top I have it set to 1 on the scale that goes to 9, the sensor bulb is in the lower right in the front with the tube going all the way to the top and screwed in. if its still on and not shutting down is it in the sensing bulb or maybe the selector knob.
Users browsing this topic
Guest (8)
7 Pages«<4567>
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.