7 Pages«<4567> Go to Page...

OLD GE Upright freezer retro Compressor Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: AU144	Brand: GE	Age: More than 10 years
Previous Topic Next Topic

Bohnenblust		#51 Posted : Tuesday, November 4, 2008 6:20:43 AM(UTC)
Rank: Member Groups: Registered Joined: 10/8/2008(UTC) Posts: 32		-8 when should it shut off?
User Profile View All Posts by User View Thanks

v2k04		#52 Posted : Tuesday, November 4, 2008 6:30:36 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 10/9/2008(UTC) Posts: 784		Let it go plugged in for 4-5 days and see what happens
User Profile View All Posts by User View Thanks

Bohnenblust		#53 Posted : Tuesday, November 4, 2008 6:31:39 AM(UTC)
Rank: Member Groups: Registered Joined: 10/8/2008(UTC) Posts: 32		-10, will it hurt the compressor to run so low?
User Profile View All Posts by User View Thanks

v2k04		#54 Posted : Tuesday, November 4, 2008 6:37:31 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 10/9/2008(UTC) Posts: 784		I've seen them pull to 14 and 20 below but it should cycle off soon
User Profile View All Posts by User View Thanks

Bohnenblust		#55 Posted : Tuesday, November 4, 2008 6:43:04 AM(UTC)
Rank: Member Groups: Registered Joined: 10/8/2008(UTC) Posts: 32		What are the settings on the thermostat for if the 1 setting or warmest is lower than 12 below now?
User Profile View All Posts by User View Thanks

Bohnenblust		#56 Posted : Tuesday, November 4, 2008 8:04:05 AM(UTC)
Rank: Member Groups: Registered Joined: 10/8/2008(UTC) Posts: 32		down to -18 should I just not care and let it go for a few days?
User Profile View All Posts by User View Thanks

v2k04		#57 Posted : Tuesday, November 4, 2008 8:07:15 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 10/9/2008(UTC) Posts: 784		I would it can't hurt nothing plus you got to figure there is no load in it, That compressor is pretty tough look at all it's been through lol You could have a bad thermastat
User Profile View All Posts by User View Thanks

Bohnenblust		#58 Posted : Tuesday, November 4, 2008 8:53:32 AM(UTC)
Rank: Member Groups: Registered Joined: 10/8/2008(UTC) Posts: 32		-20.6 degrees, it must be working now. that thermostat must be hard to find and to change out, it looks complicated.
User Profile View All Posts by User View Thanks

v2k04		#59 Posted : Tuesday, November 4, 2008 9:09:41 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 10/9/2008(UTC) Posts: 784		It should just have 2 wires on it and a sensing bulb nothing to high tech as old as it is BTW if you can figure out a sealed system repair I know you can handle a thermastat ;-)
User Profile View All Posts by User View Thanks

Bohnenblust		#60 Posted : Tuesday, November 4, 2008 9:19:51 AM(UTC)
Rank: Member Groups: Registered Joined: 10/8/2008(UTC) Posts: 32		so the selector nob is on the top I have it set to 1 on the scale that goes to 9, the sensor bulb is in the lower right in the front with the tube going all the way to the top and screwed in. if its still on and not shutting down is it in the sensing bulb or maybe the selector knob.
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (2)

7 Pages«<4567> Go to Page...