Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
upmaine  
#1 Posted : Tuesday, October 7, 2008 8:29:32 PM(UTC)
upmaine

Rank: Member

Groups: Registered
Joined: 10/7/2008(UTC)
Posts: 1

While it is spining out it is still agitating the clothes. The washer agitates fine during the wash cycle but when it goes into the spin cycle it starts to agitate at the same time it's spinning out. I had to remove the clothes because it did not like doing both cycles at one time. After removing the clothes I was able to turn it back on and drain the water out. While it was spinning out I held the lid switch down and I could see it agitating at the same time. Any ideas as to what would cause this.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Gene  
#2 Posted : Wednesday, October 8, 2008 12:36:14 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Most likely the problem is a bad gear case (aka transmission).

- The part number for the gear case is AP3096209

Here are the break down diagrams for the Roper washer Model RAL5144AW0

Gene.
Users browsing this topic
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.