Whirlpool electric dryer start button clicks but motor do not run - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Whirlpool electric dryer start button clicks but motor do not run Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: MODEL GEW9878JQ0	Brand: Whirlpool	Age: More than 10 years
Previous Topic Next Topic

Kash123		#1 Posted : Saturday, September 25, 2010 11:39:54 PM(UTC)
Rank: Member Groups: Registered Joined: 9/25/2010(UTC) Posts: 2		Whirlpool electric dryer start button clicks but motor do not run. When I open and close door clicking sound comes but motor does not start an there is no tumbling action.Please help. Thanks


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

denman		#2 Posted : Monday, September 27, 2010 4:36:06 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		Here are your parts Replacement parts for WHIRLPOOL GEW9878JQ0 \| AppliancePartsPros.com Here is the tech sheet http://www.servicematters.com/docs/wiring/Tech%20Sheet%20-%203978621.pdf Since it sounds like the unit is getting power the most likely cause is the thermal fuse in the motor circuit, Item 7 in Section 3. Unplug the unit and check the fuse with a meter should be 0 ohms. Jiggery Pokery method is. Unplug the unit. Remove both wires from the fuse, short them together and tape them up so they will not short to the frame. Plug the unit in and give it a try. If blown, replace the fuse ASAP as it is a critical safety device re: prevents lint fires which can turn into house fires. Check the components as shown in the tech sheet. Also clean/check your vent system and the blower as these are the most common causes of it blowing.
		THIS FORUM IS DEAD!!!!!!!


User Profile View All Posts by User View Thanks

Kash123		#3 Posted : Monday, September 27, 2010 8:48:09 AM(UTC)
Rank: Member Groups: Registered Joined: 9/25/2010(UTC) Posts: 2		Thnk you Denman!


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (3)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close