Rank: Member
Groups: Registered
Joined: 9/23/2008(UTC)
Posts: 2
|
water level not shutting off. before i replace pressure switch i want to know if small amount of water in the
plastic pressure cup at the bottom of tub has any
affect on level . low low works but the
thanks fran.
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 8/13/2008(UTC)
Posts: 3,097
|
If there is water in the tub you need to get that out. check for cracks or pin holes in the tube.
nat
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 9/23/2008(UTC)
Posts: 2
|
nat
water not in tub but small amount settles in the plastic air cup from which a plastic tube goes to pressure switch. i'll check hose for holes. would water in plastic air cup affect level in tub.
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 8/13/2008(UTC)
Posts: 3,097
|
If there is water in the tube(sorry didn't hit the E before) that will effect the water level.
Nat
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586
Was thanked: 2 time(s) in 2 post(s)
|
I would blow in the end of that plastic tube to clear the water out. I also use a turkey baster and pump some vinegar down it to dissolve any soap residue.
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
