Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Turntable not turning
Options
Go to last post Go to first unread
Model: SCA1001FSF01 Brand: GE Age: 5 - 10 years
Previous Topic Next Topic
calvert41  
#1 Posted : Tuesday, September 16, 2008 5:25:31 AM(UTC)
calvert41

Rank: Member

Groups: Registered
Joined: 9/11/2008(UTC)
Posts: 5
Have a GE Advantium 120 and the turntable stopped turning. Have checked for debri, all is clear but still will not turn. Help in any way with this issue would be GREATLY APPRECIATED
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
Gene  
#2 Posted : Tuesday, September 16, 2008 3:03:11 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Remove the bottom cover. Remove the wires from the motor (#1472 on the break down diagram) and check for 120VAC to the motor while the microwave is "on".

If there is 120VAC then replace the motor.

If there is no 120VAC then replace the control board.

- The part number for the turntable motor assembly is AP3183636

- The part number for the control board is AP3186997

Here are the break down diagrams for the GE microwave Model SCA1001FSS001

Gene.
Back to top
calvert41  
#3 Posted : Tuesday, September 16, 2008 3:31:37 PM(UTC)
calvert41

Rank: Member

Groups: Registered
Joined: 9/11/2008(UTC)
Posts: 5
:) Gene THANK YOU so much for your advise and expertise to steer me in the right direction
Back to top
Gene  
#4 Posted : Tuesday, September 16, 2008 3:44:10 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
You're welcome. Keep us posted.

Gene.
Back to top
calvert41  
#5 Posted : Tuesday, September 16, 2008 4:26:18 PM(UTC)
calvert41

Rank: Member

Groups: Registered
Joined: 9/11/2008(UTC)
Posts: 5
:) I sure will
Thanks again
Back to top
calvert41  
#6 Posted : Monday, September 29, 2008 5:25:13 AM(UTC)
calvert41

Rank: Member

Groups: Registered
Joined: 9/11/2008(UTC)
Posts: 5
Gene
I replaced turntable motor and it WORKS, she is happy.
Can't thank you enough.

Thanks,
Mark
Back to top
calvert41  
#7 Posted : Thursday, October 16, 2008 11:33:02 PM(UTC)
calvert41

Rank: Member

Groups: Registered
Joined: 9/11/2008(UTC)
Posts: 5
Gene thanks a million. Replaced motor and it works.You made it so easy, especially by supplying the part #'s.
Back to top
Gene  
#8 Posted : Friday, October 17, 2008 3:01:32 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
You are welcome. I'm glad you were able to fix it.

Gene.
Back to top
Users browsing this topic
Guest (4)
Similar Topics
Spacemaker XL1800 turntable not turning (Microwave Repair)
by sedquid 12/24/2011 6:10:33 PM(UTC)
Microwave turntable not turning (Microwave Repair)
by richard Keller 4/26/2011 8:32:50 AM(UTC)
Microwave turntable not turning (Microwave Repair)
by raggediean 1/8/2011 1:56:57 PM(UTC)
Jenn air turntable not turning (Microwave Repair)
by Rharvey742 3/2/2010 5:37:12 AM(UTC)
Turntable not turning (Microwave Repair)
by dongre 2/18/2010 3:55:32 PM(UTC)
Brand new Microwave Turntable not turning (Microwave Repair)
by trimbojd 5/2/2009 12:24:45 AM(UTC)
GE Spacemaker turntable not turning (Microwave Repair)
by kukadyga 10/16/2008 5:56:53 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET