Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
poor drying
Options
Go to last post Go to first unread
Model: LGR7646EQ3 Brand: Whirlpool Age: 5 - 10 years
Previous Topic Next Topic
paulworld  
#1 Posted : Friday, September 12, 2008 6:29:34 AM(UTC)
paulworld

Rank: Member

Groups: Registered
Joined: 9/12/2008(UTC)
Posts: 1
I have a whirlpool gas dryer that starts the drying process then stops
igniter lights and gas fire for a while and cycles but after ashort while stops cycling on. any help? was thinking of the cycling t-stat but was unsure
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
libertyappl  
#2 Posted : Friday, September 12, 2008 6:34:00 AM(UTC)
libertyappl

Rank: Advanced Member

Groups: Senior Expert
Joined: 8/13/2008(UTC)
Posts: 3,097
The cycling thermostat is probably a good place to start. Check it with an ohm meter.
Nat
Back to top
Users browsing this topic
Guest (3)
Similar Topics
Once good now poor drying dryer (Dryer Repair)
by mommymilestones 4/1/2011 12:05:06 PM(UTC)
Poor drying (Dryer Repair)
by hhtribe 12/7/2010 9:36:35 AM(UTC)
Inadequate electric dryer heat, poor drying (Dryer Repair)
by John Kahler 11/6/2010 11:46:37 AM(UTC)
Poor Drying/Heater Element Good (Dryer Repair)
by llorrachome27 9/12/2008 4:44:56 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET