Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Options
Go to last post Go to first unread
hectorbs  
#1 Posted : Thursday, September 11, 2008 11:20:09 AM(UTC)
hectorbs

Rank: Member

Groups: Registered
Joined: 9/11/2008(UTC)
Posts: 3

Runs For 5 Seconds; Then Shuts Off. All Other Functions Seem To Operate (clock, Display, Light, Etc.)
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
libertyappl  
#2 Posted : Thursday, September 11, 2008 12:30:56 PM(UTC)
libertyappl

Rank: Advanced Member

Groups: Senior Expert
Joined: 8/13/2008(UTC)
Posts: 3,097

Is this an over range microwave?
Nat
hectorbs  
#3 Posted : Friday, September 12, 2008 6:24:10 AM(UTC)
hectorbs

Rank: Member

Groups: Registered
Joined: 9/11/2008(UTC)
Posts: 3

No. It's A Countertop Model
libertyappl  
#4 Posted : Friday, September 12, 2008 6:32:49 AM(UTC)
libertyappl

Rank: Advanced Member

Groups: Senior Expert
Joined: 8/13/2008(UTC)
Posts: 3,097

My personal recommendation is that your MW isn't work repairing. You can get one like that at your local department store cheaper than the parts to try to fix that one.
Nat
hectorbs  
#5 Posted : Tuesday, September 16, 2008 5:05:31 AM(UTC)
hectorbs

Rank: Member

Groups: Registered
Joined: 9/11/2008(UTC)
Posts: 3

thanks. i think i will take your advice, and scrap it.
Servicer  
#6 Posted : Monday, September 29, 2008 12:18:18 PM(UTC)
Servicer

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 191

William,
That's very useful information to have. I've seen plenty of Panasonic made Thermador microwave units with this issue. While playing with a working unit, I found that anything I did which caused the mag tube to know not pull amperage, i.e. unhook wires from mag, removing the ground screw from inverter, unplugging cn702, etc., caused the unit to shut down.
I take it there's information that runs from the inverter to the pcb board on CN701. You wouldn't happen to know what readings can be read on that harness, do ya?
Thanks,
KC
Servicer  
#7 Posted : Wednesday, October 1, 2008 7:32:18 PM(UTC)
Servicer

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 191

Copy, paste, print...

Thanks a lot William - this should really help us out in the field.

KC
panasonicghzz  
#8 Posted : Tuesday, December 20, 2011 5:46:15 AM(UTC)
panasonicghzz

Rank: Member

Groups: Banned Users
Joined: 12/20/2011(UTC)
Posts: 1

Whatever They Told You About panasonic gh2 panasonic gh2 | panasonic gh2 review panasonic gh2 And What You Should Do Today http://www.techdose.com/viewtop...etin/member.php?u=509140
Users browsing this topic
Similar Topics
Panasonic microwave resets after a few seconds on 'sensor cook' (Microwave Repair)
by Bev-Ann 6/1/2014 10:15:31 AM(UTC)
Panasonic Microwave turns off after 3 seconds (Microwave Repair)
by billy_1337 1/15/2013 2:09:51 PM(UTC)
Over Range Panasonic Microwave (Microwave Repair)
by nogloff 11/23/2012 8:17:01 PM(UTC)
panasonic microwave (Microwave Repair)
by brokenpanasonic 1/23/2012 11:43:50 AM(UTC)
panasonic microwave cooktop light (Microwave Repair)
by ch1894 11/28/2010 3:35:06 PM(UTC)
Panasonic microwave turntable turns when door opened (Microwave Repair)
by nightdog 2/6/2010 6:27:40 AM(UTC)
Panasonic Microwave Door Problem (Microwave Repair)
by pogo 1/15/2010 8:52:27 PM(UTC)
Panasonic microwave powers on for just a few seconds (Microwave Repair)
by cheapiejack 10/5/2009 8:12:09 PM(UTC)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.