Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
no1but24  
#1 Posted : Saturday, August 28, 2010 1:29:16 PM(UTC)
no1but24

Rank: Member

Groups: Registered
Joined: 8/28/2010(UTC)
Posts: 4

Hello, My Mircowave runs but does not heat, I checked the fuse and its fine i read somewhere that the magnetron tube is usally the issue, what do you guys think ?
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Elayudante  
#2 Posted : Sunday, August 29, 2010 4:12:41 PM(UTC)
Elayudante

Rank: Member

Groups: Registered
Joined: 8/29/2010(UTC)
Posts: 2

Did you fix it?
I'm having same issue with a Maytag
no1but24  
#3 Posted : Wednesday, September 1, 2010 6:57:44 PM(UTC)
no1but24

Rank: Member

Groups: Registered
Joined: 8/28/2010(UTC)
Posts: 4

I replaced the magnetron and still doesn't heat, so I tried popcorn mode just for kicks and it said sensor error on the panel, I looked up the diagram online and there are 2 sensors, a gas sensor and flame sensor any Ideas ?
tkirkey  
#4 Posted : Saturday, January 9, 2016 9:57:03 AM(UTC)
tkirkey

Rank: Member

Groups: Registered
Joined: 1/9/2016(UTC)
Posts: 2

I have a 2007 GE Monogram Mircowave. Model ZE2160SF04. It stopped heating and makes a buzzing noise? Wondered if you can offer advice on fixing or replacing?
bjenk  
#5 Posted : Wednesday, January 27, 2016 6:42:14 AM(UTC)
bjenk

Rank: Member

Groups: Registered
Joined: 1/27/2016(UTC)
Posts: 2

My GE Space Saver microwave model #JVM 1542 BF 001 comes on make a loud buzzing noise , no heat can you help me ?
rohans  
#6 Posted : Wednesday, January 27, 2016 8:10:15 AM(UTC)
rohans

Rank: Member

Groups: Registered
Joined: 1/27/2016(UTC)
Posts: 1

Typically when a microwave is making a loud buzzing noise and is not heating, there are 3 things you will want to check to diagnose the problem:

1. The magnatron
2. The high voltage capacitor
3. Power Diode
brianv28  
#7 Posted : Thursday, April 28, 2016 8:16:18 AM(UTC)
brianv28

Rank: Member

Groups: Registered
Joined: 4/28/2016(UTC)
Posts: 1

Any chance it's the door switch? Mine was had a similar issue, light worked, exhaust fan worked, control panel worked, but the heating and the turn-table did not. Ended up one of the the door switches controlled only those two things. Easy to test for, and if that's what it is, cheap too!
Users browsing this topic
Guest (3)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.