Frigidaire dishwasher is showing codes 38 and 39 on front pa - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Frigidaire dishwasher is showing codes 38 and 39 on front pa Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: FDB2810LDC1	Brand: Frigidaire	Age: 1 - 5 years
Previous Topic Next Topic

jetmecanic		#1 Posted : Thursday, September 4, 2008 6:05:05 PM(UTC)
Rank: Member Groups: Registered Joined: 9/4/2008(UTC) Posts: 1		Replaced the main control board on this dishwasher. Immediately these numbers flashing back and forth again on readout. $118 down the drain. Any ideas. No codes on repair manual under door. Thanks in advance


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

Hiszpan		#2 Posted : Friday, September 5, 2008 5:38:00 PM(UTC)
Rank: Member Groups: Registered Joined: 9/5/2008(UTC) Posts: 1		Cannot help... But can make You feel little better by telling You that I also have similar problems with my Frigidaire dishwasher (flashing dispaly lights and problems with running any cycles) and also tried buying new circuit board (cost me $150) without any success. It was suggested to me, to try to replace the control buttons board but I'm really hesitant... Need better advise.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close