Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Kenmore Gas Dryer Won't Maintain Heat
Options
Go to last post Go to first unread
Model: 110.72822101 Brand: Kenmore Age: 5 - 10 years
Previous Topic Next Topic
Bedrock  
#1 Posted : Tuesday, August 17, 2010 7:07:23 PM(UTC)
Bedrock

Rank: Member

Groups: Registered
Joined: 8/17/2010(UTC)
Posts: 2
I have read several posts concerning this problem and I am getting a little confused as where to start. The gas flame ignites and then goes out after a few minutes. The igniter glow a few minutes later but the flame does not start. If I wait and let everything cool down, it will heat up but only for a few minutes again. Okay, so I have taken it apart and checked of obstructions, included the vent to the exterior. Blower fan workes fine. Flame is blue. Which parts should I start with first or should I just replace the parts that keep coming up in the posts. (gas coil, thermal fuse, heating element, igniter, thermostats, etc)

Thanks,
Bedrock
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
kayakcrzy  
#2 Posted : Wednesday, August 18, 2010 4:01:35 AM(UTC)
kayakcrzy

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/1/2008(UTC)
Posts: 2,429
Originally Posted by: Bedrock Go to Quoted Post
I have read several posts concerning this problem and I am getting a little confused as where to start. The gas flame ignites and then goes out after a few minutes. The igniter glow a few minutes later but the flame does not start. If I wait and let everything cool down, it will heat up but only for a few minutes again. Okay, so I have taken it apart and checked of obstructions, included the vent to the exterior. Blower fan workes fine. Flame is blue. Which parts should I start with first or should I just replace the parts that keep coming up in the posts. (gas coil, thermal fuse, heating element, igniter, thermostats, etc)

Thanks,
Bedrock


Replace the coils on the gasd valve, and that will do the trick. The secondary coil is bad, that is why it starts at first, and then not after that. Quick, and easy repair, and you don't have to shut the gas off to do it. Tom ApplianceEducator.com - Parts
Back to top
Bedrock  
#3 Posted : Friday, August 20, 2010 3:24:36 AM(UTC)
Bedrock

Rank: Member

Groups: Registered
Joined: 8/17/2010(UTC)
Posts: 2
Tom,
Thanks. It works perfectly now. You were a great help.

Bedrock:)
Back to top
kayakcrzy  
#4 Posted : Friday, August 20, 2010 3:44:30 AM(UTC)
kayakcrzy

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/1/2008(UTC)
Posts: 2,429
Originally Posted by: Bedrock Go to Quoted Post
Tom,
Thanks. It works perfectly now. You were a great help.

Bedrock:)


Good Job!!!! Tom ApplianceEducator.com
Back to top
Users browsing this topic
Guest (2)
Similar Topics
Kenmore Gas Dryer Won't Maintain Heat (Dryer Repair)
by calenbd 9/28/2008 11:01:18 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET