Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
thomas e  
#1 Posted : Saturday, August 14, 2010 10:56:52 AM(UTC)
thomas e

Rank: Member

Groups: Registered
Joined: 8/14/2010(UTC)
Posts: 2

in replacing the dryer motor switch there are two prongs at the top with a blue wire coming off one with a clip on both ends. where does the other end go, is this a jumper to the other prong or what?
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
denman  
#2 Posted : Saturday, August 14, 2010 3:02:06 PM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
I cannot find any info on this unit.

Perhaps the following will help. This assumes that the unit is actually a Whirlpool.
http://www.applianceaid.com/whirlpool-dryers.html
Check out 13 and 14
THIS FORUM IS DEAD!!!!!!!
thomas e  
#3 Posted : Sunday, August 15, 2010 3:26:10 AM(UTC)
thomas e

Rank: Member

Groups: Registered
Joined: 8/14/2010(UTC)
Posts: 2

Originally Posted by: denman Go to Quoted Post
I cannot find any info on this unit.

Perhaps the following will help. This assumes that the unit is actually a Whirlpool.
http://www.applianceaid.com/whirlpool-dryers.html
Check out 13 and 14

thank you, the information was just what I needed, after connecting motor wires I cleaned all the dust from motor housing and armature and dryer is working like new.
Users browsing this topic
Guest (3)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.