Rank: Member
Groups: Registered
Joined: 8/11/2010(UTC) Posts: 1
|
When I start my dryer it works fine but there is no heat. The igniter is glowing when the dryer first start, and there is no gas or gas smell after that. Please help me with my problem?
Brad
|
|
|
|
Rank: Advanced Member
Groups: Moderators
Joined: 7/14/2010(UTC) Posts: 5,222
Was thanked: 1 time(s) in 1 post(s)
|
Originally Posted by: adrianne When I start my dryer it works fine but there is no heat. The igniter is glowing when the dryer first start, and there is no gas or gas smell after that. Please help me with my problem?
Brad You say, the igniter comes on, but does it go off and no gas flame ? And does it continue to cycle(igniter on / igniter off / no flame several times ? If it cycles with no flame you will need a new set of gas valve solenoids(coils). (see attached / click on part number for information) Part number: AP3094251
:cool:
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close