Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
sillyman  
#1 Posted : Thursday, July 29, 2010 10:09:30 AM(UTC)
sillyman

Rank: Member

Groups: Registered
Joined: 7/29/2010(UTC)
Posts: 2

Hi to everyone. My whirlpool washer wont agitate or spin and makes a bad noise while trying. Everything else seems to work fine. My neighbor said something about wig-wag solenoid but I didn't see anything under there that looks like how he described? Is it the coupler? How do I check that? What are the other possibilities? Thanks in advance....C
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
applianceman  
#2 Posted : Thursday, July 29, 2010 6:59:22 PM(UTC)
applianceman

Rank: Member

Groups: Registered
Joined: 3/28/2009(UTC)
Posts: 1,648

Your washer is too new for the wigwag Whirlpool washers haven’t had wigwags since the 80s.

Your problem is most likely the coupling that connects the motor to the transmission. To access the motor try this page Whirlpool Washer Disassembly Guide

If it is the coupling once see it, it will be obvious if it is the problem or not because it will be broken or stripped out.
sillyman  
#3 Posted : Tuesday, August 3, 2010 11:29:36 AM(UTC)
sillyman

Rank: Member

Groups: Registered
Joined: 7/29/2010(UTC)
Posts: 2

Thanks for the reply and the link to taking it apart. That is exactly what the problem was! One of the plastic pieces on the side of the rubber coupling was broke in 2 spots.
Users browsing this topic
Guest (2)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.