Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
deerhunter7719  
#1 Posted : Thursday, July 24, 2008 10:12:22 AM(UTC)
deerhunter7719

Rank: Member

Groups: Registered
Joined: 7/23/2008(UTC)
Posts: 3

Freezer side is staying cold 0 degrees to 5 degrees on thermostat setting 5. Refrigerator side will cool to 40 degrees on thermostat setting 5. After a few days refrigerator side stops cooling. If you unplug the unit let it sit a while and plug it back in it starts to cool again.After a few days refrigerator stopped cooling again. Last night I removed back panel in freezer side and ice was covered on the evap coils. I defrosted the coils and the refrigerator side starts cooling again. Can this be caused by a bad control board or faulty defrost heater or defrost thermostat.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
abadfish66  
#2 Posted : Thursday, July 24, 2008 10:41:21 AM(UTC)
abadfish66

Rank: Advanced Member

Groups: Senior Expert
Joined: 5/28/2008(UTC)
Posts: 1,620

Most likely it is the defrost heater, you can easily see if the heater is bad by taking a continuity check of the heater, also at the top of the evap is a round disk, that is your termination thermostat, check if the blue top looks like it is pushed out of the housing. The heater is at the bottom of the evap and has a blue and pink wire attached to it.
deerhunter7719  
#3 Posted : Thursday, July 24, 2008 1:30:12 PM(UTC)
deerhunter7719

Rank: Member

Groups: Registered
Joined: 7/23/2008(UTC)
Posts: 3

I checked the defrost heater and it has no continuity through it. I will get a new defrost heater. The blue top on the thermostat looks ok. Should I replace the thermostat since I am replacing the defrost heater.
abadfish66  
#4 Posted : Thursday, July 24, 2008 1:32:31 PM(UTC)
abadfish66

Rank: Advanced Member

Groups: Senior Expert
Joined: 5/28/2008(UTC)
Posts: 1,620

not really necessary.
deerhunter7719  
#5 Posted : Thursday, July 24, 2008 1:55:26 PM(UTC)
deerhunter7719

Rank: Member

Groups: Registered
Joined: 7/23/2008(UTC)
Posts: 3

Thank you for your help
Users browsing this topic
Guest (3)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.