My Whirlpool dishwasher died - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

My Whirlpool dishwasher died Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: DU 920PFGT4	Brand: Whirlpool	Age: 1 - 5 years
Previous Topic Next Topic

luisgutierrez		#1 Posted : Monday, June 21, 2010 8:58:08 PM(UTC)
Rank: Member Groups: Registered Joined: 6/21/2010(UTC) Posts: 2		My dishwasher stopped working entirely (no power to control panel etc.) so after investigating I replaced the thermal fuse #22-665-675813 and that worked for a while. Then it died again. I was told by a tech that this could happen and I remember him saying that I might need to change the panel. Can you confirm or correct and be more specific? Thanks! Lou


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

denman		#2 Posted : Tuesday, June 22, 2010 4:34:49 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		Here are your parts Replacement parts for WHIRLPOOL DU920PFGT4 \| AppliancePartsPros.com Here is the tech sheet http://www.servicematters.com/docs/wiring/Tech%20Sheet%20-%208051291.pdf Did you replace the harness when the fuse was replaced. This is very important. see Item 4 in Section 1, click on the picture to expand it. That the control board needs replacing is a possibility but there other things that can blow a fuse.
		THIS FORUM IS DEAD!!!!!!!


User Profile View All Posts by User View Thanks

luisgutierrez		#3 Posted : Tuesday, June 22, 2010 6:47:03 AM(UTC)
Rank: Member Groups: Registered Joined: 6/21/2010(UTC) Posts: 2		Thanks for your post! I did replace the harness with the one provided with the fuse. Any thoughts? Lou


User Profile View All Posts by User View Thanks

denman		#4 Posted : Wednesday, June 23, 2010 1:55:04 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		All you can do is check the components with a meter to make sure they are OK. Also check that all connections/wires are OK and none are corroded or loose. If they all measure OK then it is probably the control board but it is still a bit of a crap shoot. Hopefully someone else will jump in with suggestions.
		THIS FORUM IS DEAD!!!!!!!


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (3)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close