No water entering the washer - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

No water entering the washer Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: DU940PWKT0	Brand: Whirlpool	Age: 5 - 10 years
Previous Topic Next Topic

CHSTCHEM		#1 Posted : Friday, June 11, 2010 3:27:38 PM(UTC)
Rank: Member Groups: Registered Joined: 6/11/2010(UTC) Posts: 1		I have a Whirlpool Quiet Partner II washer. Suddenly, the water supply has stopped to the washer. The water supply seems to be fine. The float valve is free from obstruction. It appears to be the Solenoid valve where the water line comes into the washer. I would very much appreciate some guidance before I order the part with you guys. Thank you.


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

denman		#2 Posted : Tuesday, June 15, 2010 8:06:29 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		Here are your parts Replacement parts for WHIRLPOOL DU940PWKT0 \| AppliancePartsPros.com Here is the tech sheet http://www.servicematters.com/docs/wiring/Tech%20Sheet%20-%208528833.pdf Could be a number of things. First check across the water valve/overfill switch combo to see if it is getting 120 volts when the unit should be filling. They are wired in series so A wire---water valve---B wire---overfill switch---C wire. So you want to measure A wire to C wire. If no power then your problem is elsewhere. If you have power then measure across the overfill switch. If there is 120 volts across it then it is either not being actuated or is toast. If the overfill is 0 volts then measure the valve,. If it is getting 120 volts across it then either it is toast or the filter screen built into it's input side is clogged with gunk. Remove the valve from the unit and clean/check the screen. If it is clean the valve is toast and needs replacing. Part number: ap3097153 If clogged clean it. Do not permanently remove it from the valve as it is there to keep crud out of the valve, which could hold the valve popen and cause a flood.
		THIS FORUM IS DEAD!!!!!!!


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close