Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
citationman  
#1 Posted : Sunday, June 21, 2009 9:21:04 PM(UTC)
citationman

Rank: Member

Groups: Registered
Joined: 6/21/2009(UTC)
Posts: 1

Starting noticing a whining noise during spin cycle. Like a roller or bearing going bad kind of sound. The drum isn't out of balance. Anyone troubleshot this before? Thanks
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
richappy  
#2 Posted : Monday, June 22, 2009 2:44:48 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
I would turn the spin basket by hand and determine the source of the noise. Usually bad bearings will give a sort of "rough" fealing and you will hear a rumbling noise. If ok, you probablu have something stuck in the pump. You can pull the hoses off it and check.
Users browsing this topic
Guest (2)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.