Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
can't enter 'self diagnostics test' because there is no 'HOLD' button
Options
Go to last post Go to first unread
Model: GSS25WGPA Brand: GE Age: 5 - 10 years
Previous Topic Next Topic
vetteman  
#1 Posted : Saturday, June 13, 2009 11:48:19 AM(UTC)
vetteman

Rank: Member

Groups: Registered
Joined: 6/13/2009(UTC)
Posts: 18
I am trying to check thermistors on this GE. Technical service guide says to enter self diagnostics mode, press all 4 temp adjustemnt buttons at same time for 3 seconds. Once single digit display starts flashing enter the test code I am trying to test. Once the test code has been entered the display will flash to confirm the test. Then you press the HOLD button for 3 seconds and the test begins.

One problem...there is no "HOLD" buttom to press.


Any G.E. techs out there?

Thanks in advance
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
applianceman  
#2 Posted : Saturday, June 13, 2009 4:15:57 PM(UTC)
applianceman

Rank: Member

Groups: Registered
Joined: 3/28/2009(UTC)
Posts: 1,648
For some controls (ones without a hold button) you have to press any button that is not a temperature control button to begin the test. If your control only has temperature control buttons I don’t think you can use the self-diagnostic test you will have to manually check them.


Appliance Repair Guide For All Major Home Appliances
Back to top
vetteman  
#3 Posted : Monday, June 15, 2009 5:18:24 AM(UTC)
vetteman

Rank: Member

Groups: Registered
Joined: 6/13/2009(UTC)
Posts: 18
Yes I only have temp up down buttons. But the display allows me to enter a test mode, which it does just fine. The service manual doesn't mention not having a HOLD button. In fact the picture shown in the manual doesn't include a HOLD button. Still confused
Back to top
applianceman  
#4 Posted : Monday, June 15, 2009 9:30:58 AM(UTC)
applianceman

Rank: Member

Groups: Registered
Joined: 3/28/2009(UTC)
Posts: 1,648
You cannot use the self-diagnostic test unless your control has at least 5 buttons (four temperature control buttons and at least one more).
Back to top
vetteman  
#5 Posted : Monday, June 15, 2009 11:17:12 AM(UTC)
vetteman

Rank: Member

Groups: Registered
Joined: 6/13/2009(UTC)
Posts: 18
Another fine piece of engineering by G.E.
Back to top
Users browsing this topic
Guest (4)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET