Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
nlmcswain  
#1 Posted : Friday, May 29, 2009 3:12:27 PM(UTC)
nlmcswain

Rank: Member

Groups: Registered
Joined: 5/29/2009(UTC)
Posts: 4

As always I have pushed bake and it comes up 350 and I push start, it clicks and ignites it takes 10 min. to heat and no problem, now you push bake it flashs 12 min. and flashes every 10 sec. but no click or igniting sound. Broiler will come on just fine, no problems with it.
Is it the igniter? Gas will not come on unless it clicks I guess safety precaution.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Dan O.  
#2 Posted : Sunday, May 31, 2009 3:51:59 PM(UTC)
Dan O.

Rank: Advanced Member

Groups: Senior Expert
Joined: 5/31/2009(UTC)
Posts: 647

Quote:
Is it the igniter?

Is your complaint the control acting differently than before or just that the oven isn't heating properly?


Dan O.
www.Appliance411.com
The Appliance Information Site

=D~~~~~~
nlmcswain  
#3 Posted : Friday, June 5, 2009 1:51:07 PM(UTC)
nlmcswain

Rank: Member

Groups: Registered
Joined: 5/29/2009(UTC)
Posts: 4

no the oven won't come on at all but the broiler will
Dan O.  
#4 Posted : Friday, June 5, 2009 6:24:32 PM(UTC)
Dan O.

Rank: Advanced Member

Groups: Senior Expert
Joined: 5/31/2009(UTC)
Posts: 647

Quote:
the oven won't come on at all but the broiler will

The boiler is part of the oven so what you're saying is just the bake burner in the oven is not coming on after preheat. Is it on during the preheat function or is just the broil burner working at that time?

Quote:
now you push bake no click or igniting sound.

Not sparking might just be caused by a problem in the oven spark module but might also be in the main electronic control.

LINK > Whirlpool SF357PEKW0 Spark Module

LINK > Whirlpool SF357PEKW0 Electronic Control

I don't know that a failure of the spark controller (aka 'module') would cause the display to act any differently than normal so that change might be more likely to be the result of an electronic control malfunction.


Have you tried turning off power to the appliance for a minute or two to see if the control returned to normal functioning or not? I don't know what else to suggest besides having the appliance checked out. Sorry

JMO

Dan O.
www.Appliance411.com
The Appliance Information Site

=D~~~~~~
nlmcswain  
#5 Posted : Friday, June 19, 2009 2:22:36 PM(UTC)
nlmcswain

Rank: Member

Groups: Registered
Joined: 5/29/2009(UTC)
Posts: 4

Originally Posted by: Dan O. Go to Quoted Post
Is your complaint the control acting differently than before or just that the oven isn't heating properly?


Dan O.
www.Appliance411.com
The Appliance Information Site

=D~~~~~~

The control is acting a little different but it still won't ignit or even click like its trying to come on. Its not the ignitor, I really think it might be a fuse in the control panel if there is one, or its the control panel it self, it works fine for the broiler and the clock works fine everything except the baking part.
Dan O.  
#6 Posted : Saturday, June 20, 2009 9:35:54 PM(UTC)
Dan O.

Rank: Advanced Member

Groups: Senior Expert
Joined: 5/31/2009(UTC)
Posts: 647

Quote:
I really think it might be a fuse in the control panel if there is one

There isn't.

JFYI

Dan O.
www.Appliance411.com
The Appliance Information Site

=D~~~~~~
Users browsing this topic
Guest (4)
Similar Topics
Whirlpool Gas Oven won't Ignite (Oven Repair (including Ranges and Cooktops))
by davidshane 10/30/2012 11:25:32 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.