Rank: Member
Groups: Registered
Joined: 5/31/2009(UTC)
Posts: 3
|
I've read several of the threads on the GE Profile and its ice maker issues. The green light is on and I've tried cycling the horrizontal arm as suggested. The ice mode has ice in it. The frig is 3 years old.
I open the freezer and there's 6 cubes in the drawer that have been dumped by the ice maker but that's all. If I pull the horrizontal arm out toward the door, then I'll get 6 more cubes but something is causing the horrizontal arm to move away from the door and therefore shutting down the ice maker. It appears after the ice is dumped the arm goes back in away from the door.
I don't fully understand what makes the horrizontal arm move in and out as I've never paid much attention to it before.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 3/28/2009(UTC)
Posts: 1,648
|
The spring on that feeler arm is broken or out of place. I have never seen one broken but I have seen a few out of place. On this page there is a picture of the spring I am talking about.
GE Icemaker Repair Guide
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 5/31/2009(UTC)
Posts: 3
|
The spring had slipped out of place and I now have much Ice!
Thanks
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
