2 Pages12> Go to Page...

Drain solenoid staying on and burning up Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: GSD2020Z02BB	Brand: GE	Age: More than 10 years
Previous Topic Next Topic

twotyer		#1 Posted : Wednesday, May 20, 2009 8:00:06 AM(UTC)
Rank: Member Groups: Registered Joined: 5/20/2009(UTC) Posts: 5		The drain solenoid is staying activated through all cycles. I replaced the pump/motor assembly, the solenoid with a known good one, also the timer. What else could possibly cause this?
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

Gene		#2 Posted : Wednesday, May 20, 2009 3:07:00 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Originally Posted by: twotyer The drain solenoid is staying activated through all cycles. I replaced the pump/motor assembly, the solenoid with a known good one, also the timer. What else could possibly cause this? Have you replaced the timer with a new one or you just think it's good? Gene.
User Profile View All Posts by User View Thanks

twotyer		#3 Posted : Wednesday, May 20, 2009 5:55:14 PM(UTC)
Rank: Member Groups: Registered Joined: 5/20/2009(UTC) Posts: 5		didnt use a new one just one i think is good
User Profile View All Posts by User View Thanks

Gene		#4 Posted : Wednesday, May 20, 2009 8:59:25 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Most likely the problem is a bad timer. You have to replace it the new part. - The part number for the timer is AP2039699 Here are the breakdown diagrams and Replacement parts for GE GSD2020Z02BB | AppliancePartsPros.com Gene.
User Profile View All Posts by User View Thanks

twotyer		#5 Posted : Thursday, May 28, 2009 6:28:08 AM(UTC)
Rank: Member Groups: Registered Joined: 5/20/2009(UTC) Posts: 5		I put in a new timer and am still having the same problem. is there anything else you can think of? I have checked everything I can think of. thanks, Keith
User Profile View All Posts by User View Thanks

Gene		#6 Posted : Thursday, May 28, 2009 2:27:37 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Remove the toe panel and check how the power cord is connected to the dishwasher. Very likely there is a reversed polarity: the neutral from the power cord is connected to the dishwasher hot and the hot from the power cord is connected to the dishwasher neutral. Gene.
User Profile View All Posts by User View Thanks

twotyer		#7 Posted : Friday, May 29, 2009 3:55:37 AM(UTC)
Rank: Member Groups: Registered Joined: 5/20/2009(UTC) Posts: 5		I moved the dishwasher from one room to the other and wired it up myself. also it did the same thing in both rooms.
User Profile View All Posts by User View Thanks

Gene		#8 Posted : Saturday, May 30, 2009 9:57:15 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		I do not see what else could cause it. Maybe somebody else on the forum can find the solution. Gene.
User Profile View All Posts by User View Thanks

richappy		#9 Posted : Sunday, May 31, 2009 1:50:44 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 9/10/2007(UTC) Posts: 9,586 Was thanked: 2 time(s) in 2 post(s)		If I understand your comments, apparently the drain solenoid stays on all the time, independent of timer settings. If so, look for a shorted wire near the timer. You probably will need a meter to check where the shorted wire is.
User Profile View All Posts by User View Thanks

denman		#10 Posted : Sunday, May 31, 2009 3:50:34 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		Has this unit ever worked properly? The reason I ask is often people buy or are given a unit and someone has gone in and messed up the wiring. Do you have a wiring diagram? If yes could you scan it and add it to a post? Disconnect the timer, now is it activated?
		THIS FORUM IS DEAD!!!!!!!
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (8)

2 Pages12> Go to Page...