Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
Rolandtd  
#1 Posted : Tuesday, March 26, 2024 6:15:44 AM(UTC)
Rolandtd

Rank: Member

Groups: Registered
Joined: 3/26/2024(UTC)
Posts: 0
United States
Location: Ga

Hey everyone new to the forums and I figured I'd see if anyone can help me out. I have a whirlpool ler5635lq0 that I just replaced the heating element plus the thermal fuse the high limit thermostat the dryer thermal fuse and cycling thermostat. I also replaced the pulleys and belt while I was at it. Now for whatever reason my timer will not move it will stay in place and the dryer will keep going. I have tried 2 other timers with no success. I have tested the ohms on it and got 10k so I believe I have good timer motors. Strangely I've had ot actually time properly and go through a cycle a few times now it won't do it twice in a row. Has anyone seen this issue before any help would be greatly appreciated.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
WilliamM/APP Team  
#2 Posted : Wednesday, March 27, 2024 5:37:44 AM(UTC)
WilliamM/APP Team

Rank: Member

Groups: Moderators, APP Team, Registered
Joined: 2/27/2024(UTC)
Posts: 0
United States
Location: TN

Was thanked: 14 time(s) in 14 post(s)
If this is happening only in the automatic cycle, the orange wire going from the timer to the heating element will need to be checked for any indications of damage or loose connections. If this is occurring in both automatic and timed cycles, the timer likely has an issue in the cam.
Users browsing this topic
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.