Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Maytag gas oven won't maintain temperature
Options
Go to last post Go to first unread
Model: MGR5765QDQ Brand: Maytag Age: 1 - 5 years
Previous Topic Next Topic
rollins215  
#1 Posted : Monday, March 23, 2009 6:04:13 AM(UTC)
rollins215

Rank: Member

Groups: Registered
Joined: 3/23/2009(UTC)
Posts: 1
I have a Maytag gas oven/range (Model # MGR5765QDQ) that has an odd problem and was hoping for some help on what to try next.

Problem: If you set the oven to bake at a certain temperature (and the oven is cold/room temp.), it will cycle and heat normally to the desired temperature. It will continue to cycle and hold this temperature for about 20 to 30 minutes, then at some point when it goes to cycle on again you hear the "click" sound of I'm assuming a relay to tell the oven to turn on again and you can see the glow that it is starting to turn on, but it doesn't light. It will then not light again until it cools off significantly, usually after a couple of hours. It has been doing this consistantly for about 4 months. There are never any error codes displayed or anything like that. The broiler works perfectly as do the stove burners.

What I've Done: I tried replacing the igniter with a new one, but that didn't change anything, still getting the exact same problem.

Any advice on what I should try next?

Thanks!
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
Gene  
#2 Posted : Tuesday, March 24, 2009 10:45:23 AM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
If the igniter you installed was new and the right part number then the problem is a bad gas safety valve. It comes as a kit included both (Bake & Broil) gas valves and the pressure regulator.

- The part number for the valve/regulator kit is AP4009625

Here are the break down diagrams and Replacement parts for MAYTAG MGR5765QDQ | AppliancePartsPros.com

Gene.
Back to top
Guest  
#3 Posted : Saturday, January 15, 2022 2:26:44 PM(UTC)
Guest

Rank: Guest

Groups: Registered
Joined: 8/10/2018(UTC)
Posts: 0
United States
Location: 99556

Was thanked: 4 time(s) in 4 post(s)
I have a Maytag gas oven that has a similar problem. set it for 400.nit hits 400 but can drop 100 plus degrees before it kicks back in. had a technician come in, he found the same issue. replaced the control panel and a few other items. nothing changed. after a few visits and many calls from the tech to maytag, this is normal. guess I'll be getting a different oven. this is not acceptable. I can see a 20 degree swing but not 100 to 200...
Back to top
Guest  
#4 Posted : Saturday, March 4, 2023 2:33:17 PM(UTC)
Guest

Rank: Guest

Groups: Registered
Joined: 8/10/2018(UTC)
Posts: 0
United States
Location: 99556

Was thanked: 4 time(s) in 4 post(s)
I will never buy another Maytag EVER.
Back to top
Guest  
#5 Posted : Tuesday, December 19, 2023 11:29:21 AM(UTC)
Guest

Rank: Guest

Groups: Registered
Joined: 8/10/2018(UTC)
Posts: 0
United States
Location: 99556

Was thanked: 4 time(s) in 4 post(s)
Just make sure when you don't buy Maytag, that you don't buy Whirlpool or any brands associated with it.
Back to top
Users browsing this topic
Guest (3)
Similar Topics
Maytag gas oven won't maintain temperature (Oven Repair (including Ranges and Cooktops))
by homreprman 11/5/2010 6:51:30 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET