Whirlpool WDTA50SAHZ0 no start, flashing lights - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Whirlpool WDTA50SAHZ0 no start, flashing lights Options Email this topic Watch this topic Print this topic » Normal Threaded
Previous Topic Next Topic

lewist57		#1 Posted : Friday, September 15, 2023 2:30:03 PM(UTC)
Rank: Member Groups: Registered Joined: 9/15/2023(UTC) Posts: 0		Chose a cycle, select start close door and the LED on the front panel blinks constantly, along with two other LEDs on the top of the door (control panel is on the top of the door). Removing power, waiting 60 seconds plus has no effect. Choosing different cycle has no effect. Tried the 1-2-3 button to enter service diagnostic mode. All LEDs light up, close the door and then nothing. The diagnostic cycle is supposed to run for 23 minutes, but it does nothing except keeping all the LEDs lit. Thoughts?


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

Users browsing this topic
Guest

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close