Rank: Member
Groups: Registered
Joined: 12/19/2007(UTC)
Posts: 1
|
I'm having the cabinets refinished and want to remove the microwave before they start. This one is vented to an outside duct. I see 2 screws on either side of the unit (at the bottom) which look like they will let the unit slide out of its "receiver bracket" Then there are three screws in the cabinet above that look like they support a lot of weight. Appreciate any advice, warnings!
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 12/13/2007(UTC)
Posts: 323
|
two people would be a preferrable scenario... more than likely just those three screws on top should be holding it in and the microwave will be resting on a lip on the bottom of the bracket on back wall.. lift up and out while tilting top forward and pull cord through..
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 12/6/2008(UTC)
Posts: 1
|
how to remove over range microwave
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
