Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
kenmore refrigerator water dispenser leaking
Options
Go to last post Go to first unread
Model: 10653206201 Brand: Kenmore Age: 5 - 10 years
Previous Topic Next Topic
jdil923  
#1 Posted : Tuesday, September 16, 2008 5:16:57 PM(UTC)
jdil923

Rank: Member

Groups: Registered
Joined: 9/16/2008(UTC)
Posts: 4
I have a Kenmore Elite side-by-side refrigerator with icemaker and water dispenser. Recently the water dispenser started leaking slowly and has gotten worse. I believe the water inlet valve has gone bad and needs replacing, am I right? The valve appears to have two solenoids, one for the water dispenser and one for the ice maker. Please let me know if replacing the inlet valve will solve the problem!
Thanks!
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
misterfixall  
#2 Posted : Tuesday, September 16, 2008 5:38:12 PM(UTC)
misterfixall

Rank: Advanced Member

Groups: Senior Expert
Joined: 11/7/2007(UTC)
Posts: 622
it looks like you have solved your problem
Back to top
jdil923  
#3 Posted : Wednesday, September 17, 2008 2:12:07 AM(UTC)
jdil923

Rank: Member

Groups: Registered
Joined: 9/16/2008(UTC)
Posts: 4
so you agree that replacing the inlet valve will stop the dispenser from leaking? Does the solenoid going bad cause the leak?
Back to top
misterfixall  
#4 Posted : Wednesday, September 17, 2008 4:12:55 AM(UTC)
misterfixall

Rank: Advanced Member

Groups: Senior Expert
Joined: 11/7/2007(UTC)
Posts: 622
yes , the solonoid valve normally remain shut unless energised. it appears there is a leak in valve or solonoid not completly closing
Back to top
Guest  
#5 Posted : Wednesday, June 30, 2021 7:52:36 AM(UTC)
Guest

Rank: Guest

Groups: Registered
Joined: 8/10/2018(UTC)
Posts: 0
United States
Location: 99556

Was thanked: 4 time(s) in 4 post(s)
water is pouring out my dispenser changed inlet water valve still pouring turned water off
Back to top
Guest  
#6 Posted : Wednesday, June 30, 2021 11:56:28 AM(UTC)
Guest

Rank: Guest

Groups: Registered
Joined: 8/10/2018(UTC)
Posts: 0
United States
Location: 99556

Was thanked: 4 time(s) in 4 post(s)
I am working on a CT18GMXRQ01 REFRIGERATOR/FREEZER and I am still experiencing water beading up in the refrigerator top section. The drain in the freezer compartment I know is open after I remove some ice over the evaporator drain and I can pour a generous portion of water down the drain and it flows properly down to the evaporator condensate pan. Is this possibly the defrost timer not going through a proper defrost cycle or evaporator fan not blowing enough air into the refrigerator section?
Back to top
Users browsing this topic
Guest (3)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET