Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.



Go to last post Go to first unread
#1 Posted : Saturday, January 4, 2020 7:19:36 AM(UTC)

Rank: Member

Groups: Registered
Joined: 1/4/2020(UTC)
Posts: 0
United States


Would appreciate some insight.

I have a GSH22JSTESS refrigerator, S/N: SM210979.

Recently, it stopped cooling/freezing.

Lights were working.

I was able to hear a relay clicking, but nothing would engage - even after unplugging and waiting up to 30 minutes.

So I ordered a replacement board, WR55X10942 - which was recommended by several online retailers.

After replacing the board, the refrigerator turned on and everything works...

except that now the refrigerator side is too cold - freezing just about everything.

On the instructions, there is mention of certain models (based on serial number) needing the wire coming into pin 2 on the J1 connector cut.

Since my serial number doesn't meet those criteria, I did not cut anything. The pins on my J1 don't match the diagram in instructions anyway.

Does anyone have advice on what to do next?


See inside of your appliance - diagrams and part photos for virtually every model.

powered by
Users browsing this topic
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.