Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
Baughmanc  
#1 Posted : Tuesday, April 3, 2018 12:51:04 PM(UTC)
Baughmanc

Rank: Member

Groups: Registered
Joined: 4/3/2018(UTC)
Posts: 2

We successfully (yanked) the broiler unit from our 10+ year old stove. Didn't realize the new one would need to be plugged into the female connection behind the wall. Can visualize one connection but can't reach it with needle-nose pliers and can't even see the other one for the insulation.:(
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
ThatGuy  
#2 Posted : Wednesday, April 4, 2018 5:15:51 AM(UTC)
ThatGuy

Rank: Advanced Member

Groups: Expert
Joined: 7/27/2010(UTC)
Posts: 1,395
United States
Location: near the middle of nowhere

Was thanked: 24 time(s) in 24 post(s)
You're probably going to need to pull the range out and take off the back panel to access the wires. Make sure the wire ends go on nice and snug.
Baughmanc  
#3 Posted : Wednesday, April 4, 2018 6:20:28 AM(UTC)
Baughmanc

Rank: Member

Groups: Registered
Joined: 4/3/2018(UTC)
Posts: 2

Thanks! Just wanted to be sure that was an option before we opened the back. Will it be easy to spot from the back? Do you advise any specific tools?
Users browsing this topic
Guest (2)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.