Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

New Topic Post Reply
Options
Go to last post Go to first unread
scj983  
#1 Posted : Friday, March 9, 2018 6:00:01 PM(UTC)
Quote
scj983

Rank: Member

Groups: Registered
Joined: 9/18/2014(UTC)
Posts: 3

Maytag dryer. I turn it on and:

1) Igniter comes on just fine.
2) Flame comes on after about a minute
3) Flame goes off after a bit
4) Igniter comes back on
5) Flame comes back on again
6) Flame goes off again
7) Igniter comes back on.....

Then that's it. The flame does not come on again. The Igniter cycles on and off but no more flame.

I've tested all fuses, thermostats, etc.that I know to and they all seem fine.

Any thoughts on what's wrong?

Thanks
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
ThatGuy  
#2 Posted : Friday, March 9, 2018 6:22:50 PM(UTC)
Quote
ThatGuy

Rank: Advanced Member

Groups: Expert
Joined: 7/27/2010(UTC)
Posts: 1,395
United States
Location: near the middle of nowhere

Was thanked: 24 time(s) in 24 post(s)
Its probably the gas valve coils. At this point a model number would be helpful.

Here is a video to watch.

https://www.youtube.com/watch?v=b08iUTzpncc
scj983  
#3 Posted : Friday, March 9, 2018 7:34:47 PM(UTC)
Quote
scj983

Rank: Member

Groups: Registered
Joined: 9/18/2014(UTC)
Posts: 3

They're been replaced so they are brand new and are good. But on that subject is there something that can cause them to short out or work intermittently?
Quick Reply Show Quick Reply
Users browsing this topic
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.