Rank: Member
Groups: Registered
Joined: 3/2/2011(UTC)
Posts: 20
|
My down-draft Jenn-Air (JES9900BAS) range/oven's LED lights up and works.
But, the oven does not heat up at all, and the burners do not heat up or light up the red heat-on button.
What might be the problem here.
Taeseoplim.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 3/2/2011(UTC)
Posts: 20
|
The problem is the burnt power inlet. At the lower left side of the back of the unit, there is power in-let. 220 Volt electric chord is divided into three lines: white, black, and green. The green line was burnt and disconnected. So, I need a new power chord. Could you tell me the part number? taeseoplim attached the following image(s):
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 3/2/2011(UTC)
Posts: 20
|
I bought Whirlpool power cord that was exactly the same as the one on my Jenn-air, and installed it. Not it works fine.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 3/2/2011(UTC)
Posts: 20
|
Whirlpool Range/Stove/Oven Power Cord PT500 taeseoplim attached the following image(s):
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 3/2/2011(UTC)
Posts: 20
|
Now, the unit works fine other than one problem.
The downdraft vent speed does not change.
My unit has "low - high" 2-speeds. The speed on the LCD panel changes, but the actual fan speed remains low.
I assume there is a part controlling the speed of the motor. Where is it and what's the part number?
I hope this time I get some help.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 3/2/2011(UTC)
Posts: 20
|
Another issue is that the neighboring area of a burner is also getting warm. Usually, the round area of a burn is hot but the vicinity is cool. Isn't it?
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
