Roper water will not draw cold/cool water at start and stops after agitation - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Roper water will not draw cold/cool water at start and stops after agitation Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: RTW4440VQ2	Brand: Roper	Age: 1 - 5 years
Previous Topic Next Topic

Danfrisard		#1 Posted : Saturday, July 22, 2017 12:56:51 PM(UTC)
Rank: Member Groups: Registered Joined: 7/22/2017(UTC) Posts: 1		When starting on any cycle under Cold/cool will only allow hot water then stops and if you switch to hot/warm will continue to admit and reach proper water level.... cycle then proceeds thru agitation but stops at rinse.


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

Users browsing this topic
Guest

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close