How to Remove Freezer Door Glides Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: GC5SHEXNQ00	Brand: Whirlpool	Age: More than 10 years
Previous Topic Next Topic

ottogaus		#1 Posted : Sunday, June 11, 2017 10:37:16 AM(UTC)
Rank: Member Groups: Registered Joined: 12/28/2008(UTC) Posts: 19		Trying to access back wall panel in freezer compartment but can't determine how to remove the glides for the freezer baskets to allow access to panel. Pulled glides all the way forward and see a torx screw at back of glide but can't access the other screw that attaches glide to freezer wall as it is blocked by the glide. Help! Noise is driving me crazy!!
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

PNWDrew		#2 Posted : Sunday, June 11, 2017 12:08:59 PM(UTC)
Rank: Member Groups: Registered Joined: 2/2/2017(UTC) Posts: 422		There is probably a hole in the sliding part that allows access to the front screw or the whole piece slides forward or pivots upward to free it from the front mount. Can't picture it in my head but don't recall having difficulty. If that doesn't help shoot a pic of it extended and closed and maybe it'll jog my memory. What's the noise? Fan hitting something?
User Profile View All Posts by User View Thanks

ottogaus		#3 Posted : Monday, June 12, 2017 3:49:12 AM(UTC)
Rank: Member Groups: Registered Joined: 12/28/2008(UTC) Posts: 19		Thanks Drew. Don't see any hole in the sliding part (and I have looked carefully). If it slides forward or pivots, I don't know how to make that happen. Two pictures attached that I am hoping will help. Thank you! ottogaus attached the following image(s):
User Profile View All Posts by User View Thanks

ottogaus		#4 Posted : Monday, June 12, 2017 10:16:06 AM(UTC)
Rank: Member Groups: Registered Joined: 12/28/2008(UTC) Posts: 19		And I suspect the noise is either the evaporator fan or motor.
User Profile View All Posts by User View Thanks

McGear10		#5 Posted : Monday, June 12, 2017 6:24:04 PM(UTC)
Rank: Member Groups: Registered Joined: 6/4/2017(UTC) Posts: 19		I'm trying to check my own fridge and compare it with the photos attached.
User Profile View All Posts by User View Thanks

PNWDrew		#6 Posted : Monday, June 12, 2017 6:42:01 PM(UTC)
Rank: Member Groups: Registered Joined: 2/2/2017(UTC) Posts: 422		From looking at the part I think they pivot upward at the front then slide off the rear mount. The attachment points seem to support that idea. There's only a fan in there. The evap shouldn't make any real noise. Possibly ice hitting the fan blades or a bad motor.
User Profile View All Posts by User View Thanks

ottogaus		#7 Posted : Wednesday, June 14, 2017 10:13:15 AM(UTC)
Rank: Member Groups: Registered Joined: 12/28/2008(UTC) Posts: 19		Thanks but still can't figure out how to remove. Any further thoughts? McGear, were you able to look at yours??
User Profile View All Posts by User View Thanks

McGear10		#8 Posted : Wednesday, June 14, 2017 10:07:42 PM(UTC)
Rank: Member Groups: Registered Joined: 6/4/2017(UTC) Posts: 19		I was able to, but I can't determine which could possibly the source of the noise.
User Profile View All Posts by User View Thanks

ottogaus		#9 Posted : Thursday, June 15, 2017 7:36:13 AM(UTC)
Rank: Member Groups: Registered Joined: 12/28/2008(UTC) Posts: 19		Can you post how to remove the glides McGear? Thank you!
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest