Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.



Go to last post Go to first unread
#1 Posted : Sunday, November 13, 2016 6:55:35 PM(UTC)

Rank: Member

Groups: Registered
Joined: 11/13/2016(UTC)
Posts: 1

The dishwasher doesn't complete the cleaning cycle. The diagnostic code errors are 6-4 6-1 6-2 3-3. During the diagnosis check water fills, can hear water spraying and arms turn. The heating element gets hot. The washer drains. During real wash cycles it doesn't always appear to have enough water. The washer usually stops before the drying cycle.
Any suggestions are welcomed and appreciated.
Thank you.
See inside of your appliance - diagrams and part photos for virtually every model.

powered by
#2 Posted : Monday, November 14, 2016 1:01:58 PM(UTC)

Rank: Advanced Member

Groups: Expert
Joined: 7/27/2010(UTC)
Posts: 1,395

Was thanked: 1 time(s) in 1 post(s)
Could your water be getting siphoned out by the drain?

I used to see this once in awhile. The drain is hooked together in such a way that at some point in the cycle, usually right after it drains and then starts refilling, the water is siphoned out as fast as it fills.

I used to always carry a siphon break in my vehicle just for these rare drain problems.


Users browsing this topic
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.