Rank: Member
Groups: Registered
Joined: 9/30/2016(UTC) Posts: 2
|
Installed new main control board and inverter board. Replaced the filter dryers, and the suction side covered with ice.
|
|
|
|
Rank: Member
Groups: Registered
Joined: 9/30/2016(UTC) Posts: 2
|
Originally Posted by: Jerrysing Installed new main control board and inverter board. Replaced the filter dryers, and the suction side covered with ice. Can anyone help me out with this been working on this for quite a few hours. I also replaced the evaporator fan and the defrost resistance test checks out OK. But the suction side is heavily covered with frost.
|
|
|
|
Rank: Member
Groups: Registered
Joined: 3/28/2016(UTC) Posts: 200
|
Sounds like it's overcharged. Evacuate, pull a vacuum and recharge with proper amount of freon. The amount is on the data tag inside.
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close