Kenmore model#79049079402 resets when starting bake - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Kenmore model#79049079402 resets when starting bake Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: 79049079402	Brand: Kenmore	Age: 1 - 5 years
Previous Topic Next Topic

seangermany		#1 Posted : Tuesday, January 13, 2015 9:45:20 AM(UTC)
Rank: Member Groups: Registered Joined: 1/13/2015(UTC) Posts: 2		Hello Forum, My Kenmore elite wall oven (Model#79049079402) has started to reset to PF (Clock resets to 12:00 - like an initial power up) whenever I program it to cook (bake, warm, broil, etc). There are no error codes. I'm usually successful after a couple of attempts (after it resets, I press STOP, set the clock and try again - BAKE, TEMP, START), but this is an issue that I'd like to address. Any ideas on what the issue could be?? Thanks in advance..


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

cnimegeers		#2 Posted : Sunday, July 10, 2016 1:07:43 PM(UTC)
Rank: Member Groups: Registered Joined: 7/10/2016(UTC) Posts: 2		I had the same problem show up this week on our Kenmore Elite model C970-600133 (double oven electric range). Did you find a solution to your problem?


User Profile View All Posts by User View Thanks

seangermany		#3 Posted : Monday, July 11, 2016 12:38:34 PM(UTC)
Rank: Member Groups: Registered Joined: 1/13/2015(UTC) Posts: 2		I had to replace the control board (the unit with the clock). I found a reconditioned unit for approx. $140. It has worked perfectly since I installed it. Good luck.


User Profile View All Posts by User View Thanks

cnimegeers		#4 Posted : Monday, July 11, 2016 6:57:04 PM(UTC)
Rank: Member Groups: Registered Joined: 7/10/2016(UTC) Posts: 2		Thanks for replying. I found a posting in a different forum that said to shut off the power to the oven for 5 minutes to reset the board. That worked - at least for now. We'll see if it lasts. Hopefully I can avoid replacing the board!


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (3)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close