Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

New Topic Post Reply
Options
Go to last post Go to first unread
Mickeyrat  
#1 Posted : Sunday, March 27, 2016 8:00:45 AM(UTC)
Quote
Mickeyrat

Rank: Member

Groups: Registered
Joined: 3/27/2016(UTC)
Posts: 2

Washer will begin sensing cycle and immediately there is a relatively loud but very short whirring sound that doesnt sound normal then the lid lock opens and the lid light flashes continually.

Have also had intermittent drain and spin issues. Have checked the drain pump and it is clear and the belt drive spins freely both clockwise and counterclockwise and I can hear water being moved during manually spin drive belt.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Mickeyrat  
#2 Posted : Saturday, April 2, 2016 11:55:38 AM(UTC)
Quote
Mickeyrat

Rank: Member

Groups: Registered
Joined: 3/27/2016(UTC)
Posts: 2

Changed out the actuator.
Washer will run the hand wash cycle to completion. Wll not do bulk , normal, or perm press cycles. It does a quick senseing cycle then loud buzz now, then the lid lock releases and the lock light flashes.
So I am asking what my next step is? Control board?
Having put washer on its front , I read soemwhere it was necessary to reset the machine? How do I do that?
Quick Reply Show Quick Reply
Users browsing this topic
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.