black spots of clothes after washing - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

black spots of clothes after washing Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: LA7680XSNO	Brand: Whirlpool	Age: More than 10 years
Previous Topic Next Topic

jgb		#1 Posted : Wednesday, May 20, 2009 6:37:48 PM(UTC)
Rank: Member Groups: Registered Joined: 5/20/2009(UTC) Posts: 3		Black spots which can't be removed are appearing on clothes after washing. Will replacing the centerpost gasket fix this, or is there something else wrong? I can't find parts for LA7680XSNO, but can for LA7680XSWO. Are their parts interchangable?


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

richappy		#2 Posted : Thursday, May 21, 2009 1:44:49 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 9/10/2007(UTC) Posts: 9,586 Was thanked: 2 time(s) in 2 post(s)		Pull off the agitator (7/16 bolt below the top) and check for a bad tranny spidle seal.


User Profile View All Posts by User View Thanks

jgb		#3 Posted : Tuesday, May 26, 2009 6:04:00 PM(UTC)
Rank: Member Groups: Registered Joined: 5/20/2009(UTC) Posts: 3		Originally Posted by: richappy Pull off the agitator (7/16 bolt below the top) and check for a bad tranny spidle seal. I have removed the agitator and tub. Looking down at the centerpost, there are two shafts, one within the other. The longer innermost one is splined. Both have seals and the splined one is leaking grease. Can these seals be replaced by digging them out and pressing in new ones, or do they need to be disassembled.


User Profile View All Posts by User View Thanks

richappy		#4 Posted : Wednesday, May 27, 2009 12:41:20 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 9/10/2007(UTC) Posts: 9,586 Was thanked: 2 time(s) in 2 post(s)		I would pull the tranny, dig out the old spindle seal and replace it. Add some silicone grease, part #AP3132857


User Profile View All Posts by User View Thanks

jgb		#5 Posted : Tuesday, August 18, 2009 7:56:05 PM(UTC)
Rank: Member Groups: Registered Joined: 5/20/2009(UTC) Posts: 3		I have replaced the centerpost gasket, the transmission shaft seal and applied silicone grease and have been using the washer for about 2 1/2 months now. I am still getting black spots on my clothes. There appears to be only one seal left which is the shaft seal for the top of the basket drive tube shaft (AP3043573). Do you think that will fix my problem or do I need to buy a new washer - my wife is getting impatient because her clothes are being ruined. Any other advise?


User Profile View All Posts by User View Thanks

richappy		#6 Posted : Wednesday, August 19, 2009 12:31:34 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 9/10/2007(UTC) Posts: 9,586 Was thanked: 2 time(s) in 2 post(s)		Clean all the grease off the agitator. Also, you may need to pull the spin tube and install a new seal.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close