Rank: Member
Groups: Registered
Joined: 1/27/2016(UTC) Posts: 1
|
My GE Dishwasher will fill with water when selecting either wash or rinse setting, but does not send water through the spray arms. The dishwasher remains silent for the normal length of a wash cycle then drains. Any ideas? Thanks!
|
|
|
|
Rank: Advanced Member
Groups: Moderators
Joined: 7/14/2010(UTC) Posts: 5,222
Was thanked: 1 time(s) in 1 post(s)
|
Originally Posted by: wllindsey524 My GE Dishwasher will fill with water when selecting either wash or rinse setting, but does not send water through the spray arms. The dishwasher remains silent for the normal length of a wash cycle then drains. Any ideas? Thanks! Willindseay, You'll want to run the test mode, and see if you're getting voltage to the wash motor/pump. You may have a faulty relay on the control board [AP4484676] Use the attached tech data sheet to test the control and motor windings on the wash motor
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close